BRIDGEPOINT FLEX FIRE HEAVY DUTY EXTRACTION RINSE POWDER 2.95KG

Combine with Flex Powder with Citrus Solv to remove traffic lanes previously considered uncleanable.

• DISSOLVES QUICKLY – Flex FIRE rinse will dissolve quickly, creating a crystal-clear cleaning solution.
• LOW COST - concentrated powder means you use less and save money.
• EQUIPMENT SAFE - has special additives that help prevent corrosion and buildup in the extractor or truckmount.
• HIGH CLEANING POWER - Flex FIRE rinse will surpass all other extraction agents due to its aggressive alkalinity and high percentage surfactant blend.

DIRECTIONS:

To be used as the primary cleaning agent, or as a rinse agent, in the extraction process for heavily soiled commercial carpets. It’s highly recommended that a water softener be used for best performance results and to prevent precipitation caused by high heat truckmounts and hard water. Flex FIRE uses special rinse agents that perform best in warm water, temperatures above boiling will cause product separation. If a water softener is not used, reduce heat to below 200 degrees.

For truckmount concentrate: Add 1 to 2 cups of Flex FIRE rinse to 20 Ltr of cold or warm water. Mix thoroughly until dissolved. For systems metered on low settings, or for excessively soiled carpets, 3 cups may be used.
For portable equipment: Use 30 grams of Flex FIRE rinse per 20 Litre hot water. For extra heavy soil use 60 grams per 20 Litres of hot water.

Dilution: 1.5 grams/Ltr RTU pH: 11.3-11.5 Contains: 2.72kg